This is a 1967 Chevrolet Impala underhood and trunk bolt, nut and screw kit. The kit contains 226 items. This kit may contain screws for more than one model. Disregard any extra screws. The kit includes the following screws, nuts and bolts: fan shroud bolts (4), radiator mounting bolts (4), radiator spacer panel bolts (4), hood latch and catch bolts (8), hood latch brace bolts (2), fender to radiator core support bolts (4), front wheel well and valance bolts (14), outer wheel well bolts (12), battery tray mounting bolts (2), lower rear fender bolts (2), grille and brace bolts (14), upper wheel well bolts and washers (6 ea.), wheel well bolts and washers brace to body (6 ea.), wheel well nuts brace to body (6),lower fender brace bolts (2), fan shroud u-nuts (4), horn mounting bolts (2), windshield washer nozzle screws (2), hood molding nuts (11), accelerator bracket to firewall screws (2), wiring ground screws (2), motor ground screw (1), A/C vacuum tank screw (1), wiring gutter screws on firewall (2), voltage regulator screws (3), hood hinge bolts (8), battery hold down bolt (1), deck lid bolts (4), battery tray bolts (2), trunk latch and catch bolts (5), Chevrolet grille emblem nuts (2), Impala quarter panel emblem nuts (12), trunk light screw (1), A/C dryer hold down bolts and nuts (2 ea.), master cylinder nuts (4), deck lid molding screws (4), deck lid molding nuts (4), accelerator bracket screws (2), tail light mounting nuts (8), A/C heater housing connecting screws (6), A/C heater housing to firewall screws (6), A/C hose grommet screws (3), A/C condenser bracket screws (8), A/C condenser mounting screws (4), and rear fender and jamb bolts (6).